Digiop BLK-IPS101 Průvodce nastavením stáhnout pdf (Strana 29)

25NVR and hDVR Systems Setup Guide

SECTION 3: SYSTEM SETUP

1. Place a check mark in the Enable Sensors and Controls checkbox.

2. Select a sensor from the list of those that are available. Sensors are color coded to indicate their availability:

— Blue – Sensor available

— Yellow – Sensor selected

— Grey – Sensor unavailable

NOTE

In this example, an NVR is congured with 16 cameras, four sensor inputs, and four control outputs.

3. Enable sensors by selecting a Sensor Time: From hour and To hour (0-24).

4. Select a camera to associate with the sensor. As in the example below, the selected camera is highlighted in green. Available

analog cameras have blue numbers and are highlighted in blue when selected. Channels with maroon numbers are available

but do not have a camera associated with them. Unavailable channels are greyed out.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 46 47

Žádné komentáře

Digiop BLK-IPS101 Průvodce nastavením Strana 29